[Guide] Flash / Update Firmware Samsung GALAXY S7 EDGE SM-G935F Using ODIN v3.11.1.

Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F. This guide show you how to flash a stock ROM on Samsung GALAXY S7 EDGE SM-G935F using Odin V3.11.1 software. Before you decide to use this guide, we recommend using Samsung’s own utilities, Samsung Kies and OTA (Over-the-air). Only use this guide if you are 100% sure about the risks involved in flashing your device. guidebelajar is not responsible for any damage caused by following this guide.

This Samsung android device is released on 2016, March. and available on USA, Global and Southeast  Asia. Samsung GALAXY S7 EDGE SM-G935F is the smartphone with 5,1 Inchi Super AMOLED capacitive touchscreen, 16M colors, work on Android OS, v6.0 (Marshmallow), with Quad-core 1.8 GHz CDual-core 2.15 GHz Kryo & dual-core 1.6 GHz Kryo CPU, Qualcomm MSM8996 Snapdragon 820 chipset, Adreno 530 GPU, combined with 4 GB of RAM and 12 MP of  Main camera and 5 MP on secondary camera. 

Flashing process in android Smartphone is like reinstall process on windows computer PC, with flash your Samsung GALAXY S7 EDGE SM-G935F android device you can unbrick, downgrade, manually upgrade (instead of updating via OTA or Samsung Smart Switch), or restore Samsung's stock firmware instead of custom ROM. I make this guide just for you as user all Samsung GALAXY S7 EDGE SM-G935F variant.

You need to read this guide carefully, so you can get the best result flashing on your Samsung GALAXY S7 EDGE SM-G935F. Cause you need to download necessary file, you must ensure that you have good internet connection in your computer device, this guide using a windows computer.

Initial Step To Flash Samsung GALAXY S7 EDGE SM-G935F 

Now, we have reached on beginning guide, so you must to do initial step to ensure everything run smoothly.

1. Make sure your Samsung GALAXY S7 EDGE SM-G935F battery is not in a low battery state, a minimum of 80%. If the battery runs out in the middle of the Root, it can lead to failure
2. Always perform backup your important data before flashing process, Cause this process will delete or erase the data in memory.
3. Make sure you have installed a Latest of Driver Samsung  that support with your Smartphone, If you don't have, please download here
4. Original USB cable driver for your Samsung GALAXY S7 EDGE SM-G935F
5. Download Samsung Smart Switch, Here
6. Download Odin V3.11.1, Here
7. Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit the other site, Here

Main Guide To Flash Samsung GALAXY S7 EDGE SM-G935F 

1. You must download all necessary file.(Samsung USB driver or Smart Switch and Odin)
2. Then you must install all driver or samsung smart switch to your computer or PC.
3. Extraxt Odin V3.11.1. file on the destination folder.
4. To download Samsung firmware you must visit this link, you can download specific firmware file for your device model number. you must Log In with your registered account on this website.

   

   sammobile website Log In

5. On the row menu at the top of page, you can select firmware.

   

   sammobile website GALAXY S7 EDGE SM-G935F

6. Then you must enter in search bar with your phone model number.

   

   Firmware Samsung GALAXY S7 EDGE SM-G935F
7. Then select your country/carrier.

   

   select country or carrier for samsung firmware
8. Then you click on available country link.
9. For Non-Premium member you can Select regular download.

   

   sammobile download non premium member
10. And Donwload button again. Approximately file size is 1,9 GB
11. Wait untill your file finish downloaded, after that you must extract all firmware file on specific folder on your computer.
12. This is your file.

    

    Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F

13. Switch Off your Samsung GALAXY S7 EDGE SM-G935F to start flashing process.
14. Then, you must run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.

    

    Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F

15. When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file. 

    

    Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F

16. Now your firmware file has been inserted in Odin3 

    

    Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F

17. Then, Enter download mode your Samsung GALAXY S7 EDGE SM-G935F by pressing and hold Volume Down Button + Home Button + Power Button. Hold and press all button untill your phone vibrate and LCD show menu.

    

    download mode Samsung GALAXY S7 EDGE SM-G935F
18. And you will see picture like this on your LCD screen.



Download Mode GALAXY S7 EDGE SM-G935F

19. On this mode, now you must connect your Samsung GALAXY S7 EDGE SM-G935F to your PC / laptop using a USB cable. 
20. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)

    

    Port Com samsung GALAXY S7 EDGE SM-G935F

21. Make sure re-partition is NOT ticked
22. When everything already you can click Start Button. at the bottom left corner
23. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
24. When complete it will display a notification PASS and your smartphone Samsung GALAXY S7 EDGE SM-G935F will automatically restart.
25. Wait your device to boot up, it will take a while.
26. When your Samsung GALAXY S7 EDGE SM-G935F is ready to use, you can check your firmware update version by dial *#1234# on dial pad.

    

    dial pad samsung GALAXY S7 EDGE SM-G935F

27. And you will see your new firmware version.

    

    firmware version samsung GALAXY S7 EDGE SM-G935F

28. Finish.




Warning.

Never disconnect the USB cable while flashing process is running.
Install Samsung Mobile Driver or Samsung Smart Switch if you don't see a sign in Odin.
Flash your Samsung GALAXY S7 EDGE SM-G935F device at your own risk.
Flashing firmwares which contains more than one *.tar.md5 file will wipe all data on internal storage.  Flashing official/stock firmware won't increase the binary flash nor KNOX WARRANTY VOID counter and won't cancel the Samsung GALAXY S7 EDGE SM-G935F device's warranty. 

[Guide] Flash / Update Firmware Samsung GALAXY S7 SM-G930F Using ODIN v3.11.1.

Flash Stock Firmware On Samsung GALAXY S7 SM-G930F. This guide show you how to flash a stock ROM on Samsung GALAXY S7 SM-G930F using Odin V3.11.1 software. Before you decide to use this guide, we recommend using Samsung’s own utilities, Samsung Kies and OTA (Over-the-air). Only use this guide if you are 100% sure about the risks involved in flashing your device. guidebelajar is not responsible for any damage caused by following this guide.

This Samsung android device is released on 2016, February. and available on USA, Global and Southeast  Asia. Samsung GALAXY S7 SM-G930F is the smartphone with 5,1 Inchi Super AMOLED capacitive touchscreen, 16M colors, work on Android OS, v6.0 (Marshmallow), with Quad-core 1.8 GHz CDual-core 2.15 GHz Kryo & dual-core 1.6 GHz Kryo CPU, Qualcomm MSM8996 Snapdragon 820 chipset, Adreno 530 GPU, combined with 4 GB of RAM and 12 MP of  Main camera and 5 MP on secondary camera. 

Flashing process in android Smartphone is like reinstall process on windows computer PC, with flash your Samsung GALAXY S7 SM-G930F android device you can unbrick, downgrade, manually upgrade (instead of updating via OTA or Samsung Smart Switch), or restore Samsung's stock firmware instead of custom ROM. I make this guide just for you as user all Samsung GALAXY S7 SM-G930F variant.

You need to read this guide carefully, so you can get the best result flashing on your Samsung GALAXY S7 SM-G930F. Cause you need to download necessary file, you must ensure that you have good internet connection in your computer device, this guide using a windows computer.

Initial Step To Flash Samsung GALAXY S7 SM-G930F 

Now, we have reached on beginning guide, so you must to do initial step to ensure everything run smoothly.

1. Make sure your Samsung GALAXY S7 SM-G930F battery is not in a low battery state, a minimum of 80%. If the battery runs out in the middle of the Root, it can lead to failure
2. Always perform backup your important data before flashing process, Cause this process will delete or erase the data in memory.
3. Make sure you have installed a Latest of Driver Samsung  that support with your Smartphone, If you don't have, please download here
4. Original USB cable driver for your Samsung GALAXY S7 SM-G930F
5. Download Samsung Smart Switch, Here
6. Download Odin V3.11.1, Here
7. Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit the other site, Here

Main Guide To Flash Samsung GALAXY S7 SM-G930F 

1. You must download all necessary file.(Samsung USB driver or Smart Switch and Odin)
2. Then you must install all driver or samsung smart switch to your computer or PC.
3. Extraxt Odin V3.11.1. file on the destination folder.
4. To download Samsung firmware you must visit this link, you can download specific firmware file for your device model number. you must Log In with your registered account on this website.

   

   sammobile website Log In

5. On the row menu at the top of page, you can select firmware.

   

   sammobile website GALAXY S7 SM-G930F

6. Then you must enter in search bar with your phone model number.

   

   Firmware Samsung GALAXY S7 SM-G930F
7. Then select your country/carrier.

   

   select country or carrier for samsung firmware
8. Then you click on available country link.
9. For Non-Premium member you can Select regular download.

   

   sammobile download non premium member
10. And Donwload button again. Approximately file size is 1,5 GB
11. Wait untill your file finish downloaded, after that you must extract all firmware file on specific folder on your computer.
12. This is your file.

    

    Flash Stock Firmware On Samsung GALAXY S7 SM-G930F

13. Switch Off your Samsung GALAXY S7 SM-G930F to start flashing process.
14. Then, you must run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.

    

    Flash Stock Firmware On Samsung GALAXY S7 SM-G930F

15. When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file. 

    

    Flash Stock Firmware On Samsung GALAXY S7 SM-G930F

16. Now your firmware file has been inserted in Odin3 

    

    Flash Stock Firmware On Samsung GALAXY S7 SM-G930F

17. Then, Enter download mode your Samsung GALAXY S7 SM-G930F by pressing and hold Volume Down Button + Home Button + Power Button. Hold and press all button untill your phone vibrate and LCD show menu.

    

    download mode Samsung GALAXY S7 SM-G930F
18. And you will see picture like this on your LCD screen.



Download Mode GALAXY S7 SM-G930F

19. On this mode, now you must connect your Samsung GALAXY S7 SM-G930F to your PC / laptop using a USB cable. 
20. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)

    

    Port Com samsung GALAXY S7 SM-G930F

21. Make sure re-partition is NOT ticked
22. When everything already you can click Start Button. at the bottom left corner
23. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
24. When complete it will display a notification PASS and your smartphone Samsung GALAXY S7 SM-G930F will automatically restart.
25. Wait your device to boot up, it will take a while.
26. When your Samsung GALAXY S7 SM-G930F is ready to use, you can check your firmware update version by dial *#1234# on dial pad.

    

    dial pad samsung GALAXY S7 SM-G930F

27. And you will see your new firmware version.

    

    firmware version samsung GALAXY S7 SM-G930F

28. Finish.




Warning.

Never disconnect the USB cable while flashing process is running.
Install Samsung Mobile Driver or Samsung Smart Switch if you don't see a sign in Odin.
Flash your Samsung GALAXY S7 SM-G930F device at your own risk.
Flashing firmwares which contains more than one *.tar.md5 file will wipe all data on internal storage.  Flashing official/stock firmware won't increase the binary flash nor KNOX WARRANTY VOID counter and won't cancel the Samsung GALAXY S7 SM-G930F device's warranty. 

[Guide] Flash / Update Firmware Samsung GALAXY A9 SM-A9000 Using ODIN v3.11.1.

Flash Stock Firmware On Samsung GALAXY A9 SM-A9000. This guide show you how to flash a stock ROM on Samsung GALAXY A9 SM-A9000 using Odin V3.10.7 software. Before you decide to use this guide, we recommend using Samsung’s own utilities, Samsung Kies and OTA (Over-the-air). Only use this guide if you are 100% sure about the risks involved in flashing your device. guidebelajar is not responsible for any damage caused by following this guide.

This Samsung android device is released on 2015, December. and available worldwide. Samsung GALAXY A9 SM-A9000 is the smartphone with 6,0 Inchi Super AMOLED capacitive touchscreen, 16M colors, work on Android OS, v5.1.1 (Lollipop), planned upgrade to v6.0 (Marshmallow), with Quad-core 1.8 GHz Cortex-A72 & quad-core 1.2 GHz Cortex-A53 CPU, Qualcomm MSM8976 Snapdragon 652 chipset, Adreno 510 GPU, combined with 3 GB of RAM and 13 MP of  Main camera and 8 MP on secondary camera. 

Flashing process in android Smartphone is like reinstall process on windows computer PC, with flash your Samsung GALAXY A9 SM-A9000 android device you can unbrick, downgrade, manually upgrade (instead of updating via OTA or Samsung Smart Switch), or restore Samsung's stock firmware instead of custom ROM. I make this guide just for you as user all Samsung GALAXY A9 SM-A9000 variant.

You need to read this guide carefully, so you can get the best result flashing on your Samsung GALAXY A9 SM-A9000. Cause you need to download necessary file, you must ensure that you have good internet connection in your computer device, this guide using a windows computer.

Initial Step To Flash Samsung GALAXY A9 SM-A9000 

Now, we have reached on beginning guide, so you must to do initial step to ensure everything run smoothly.

1. Make sure your Samsung GALAXY A9 SM-A9000 battery is not in a low battery state, a minimum of 80%. If the battery runs out in the middle of the Root, it can lead to failure
2. Always perform backup your important data before flashing process, Cause this process will delete or erase the data in memory.
3. Make sure you have installed a Latest of Driver Samsung  that support with your Smartphone, If you don't have, please download here
4. Original USB cable driver for your Samsung GALAXY A9 SM-A9000
5. Download Samsung Smart Switch, Here
6. Download Odin V3.11.1, Here
7. Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit the other site, Here

Main Guide To Flash Samsung GALAXY A9 SM-A9000 

1. You must download all necessary file.(Samsung USB driver or Smart Switch and Odin)
2. Then you must install all driver or samsung smart switch to your computer or PC.
3. Extraxt Odin V3.10.7. file on the destination folder.
4. To download Samsung firmware you must visit this link, you can download specific firmware file for your device model number. you must Log In with your registered account on this website.

   

   sammobile website Log In

5. On the row menu at the top of page, you can select firmware.

   

   sammobile website GALAXY A9 SM-A9000

6. Then you must enter in search bar with your phone model number.

   

   Firmware Samsung GALAXY A9 SM-A9000
7. Then select your country/carrier.

   

   select country or carrier for samsung firmware
8. Then you click on available country link.
9. For Non-Premium member you can Select regular download.

   

   sammobile download non premium member
10. And Donwload button again. Approximately file size is 1,5 GB
11. Wait untill your file finish downloaded, after that you must extract all firmware file on specific folder on your computer.
12. This is your file.

    

    Flash Stock Firmware On Samsung GALAXY A9 SM-A9000

13. Switch Off your Samsung GALAXY A9 SM-A9000 to start flashing process.
14. Then, you must run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.

    

    Flash Stock Firmware On Samsung GALAXY A9 SM-A9000

15. When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file. 

    

    Flash Stock Firmware On Samsung GALAXY A9 SM-A9000

16. Now your firmware file has been inserted in Odin3 

    

    Flash Stock Firmware On Samsung GALAXY A9 SM-A9000

17. Then, Enter download mode your Samsung GALAXY A9 SM-A9000 by pressing and hold Volume Down Button + Home Button + Power Button. Hold and press all button untill your phone vibrate and LCD show menu.

    

    download mode Samsung GALAXY A9 SM-A9000
18. And you will see picture like this on your LCD screen.



Download Mode GALAXY A9 SM-A9000

19. On this mode, now you must connect your Samsung GALAXY A9 SM-A9000 to your PC / laptop using a USB cable. 
20. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)

    

    Port Com samsung GALAXY A9 SM-A9000

21. Make sure re-partition is NOT ticked
22. When everything already you can click Start Button. at the bottom left corner
23. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
24. When complete it will display a notification PASS and your smartphone Samsung GALAXY A9 SM-A9000 will automatically restart.
25. Wait your device to boot up, it will take a while.
26. When your Samsung GALAXY A9 SM-A9000 is ready to use, you can check your firmware update version by dial *#1234# on dial pad.

    

    dial pad samsung GALAXY A9 SM-A9000

27. And you will see your new firmware version.

    

    firmware version samsung GALAXY A9 SM-A9000

28. Finish.




Warning.

Never disconnect the USB cable while flashing process is running.
Install Samsung Mobile Driver or Samsung Smart Switch if you don't see a sign in Odin.
Flash your Samsung GALAXY A9 SM-A9000 device at your own risk.
Flashing firmwares which contains more than one *.tar.md5 file will wipe all data on internal storage.  Flashing official/stock firmware won't increase the binary flash nor KNOX WARRANTY VOID counter and won't cancel the Samsung GALAXY A9 SM-A9000 device's warranty. 

[Guide] Hard Reset Samsung Z3 To Restore Factory Setting & Remove Forgot Pattern/PIN/Password.

Hard Reset Samsung Z3. Samsung Z3 has this version (Z300H/DD (India)), This device is released on October, 2015. And today's guidebelajar will explain to you how to perform hard reset on Samsung Z3 smartphone. Please keep in mind, this tutorial will erase all data saved on your internal memory. Samsung Z3 is the smartphone with 5,0 Inchi Super AMOLED capacitive touchscreen, 16M colors, work on Tizen OS, v2.3, upgradable to v2.4, and supported with Quad-core 1.3 GHz, Spreadtrum chipset, combined with 1 GB of RAM, 8 MP on primary camera and 5 MP on secondary camera to capture best moment and make a selfie on your life.

Most of Android user say that Hard reset process is call with master reset or factory reset. Many people asking why shoud we perform hard reset to our phone. The logical answer that can I say for this asking is :

• We will give our Samsung Z3 away to some one else, and we don't want that one know everything about our secret data, so we have to erase all data before back up it.
• There are many bug on Samsung Z3.
• Because we will sell our Samsung Z3 Android phones
• We want to remove all personal data and setting that was stored in Samsung Z3.device.
• Our Samsung Z3 has been lagging and stuck on android logo, this call with bootloop
• Samsung Z3 has a persistent problem that cannot be solved.
• We have forgotten on PIN or Patern Lock at Samsung Z3.
• and many other reason.

1st Methode. Hard Reset Samsung Z3 Using Menu :

1. Make sure your batery is fully charged, Recomended you have 80% of battery capacity
2. Then Backup your Samsung Z3. See This Guide
3. Go to menu: System Setting >
4. Select Backup and Reset >
   
5. Factory Data Reset > 
   
6. Reset Phone
   
7. Choose Erase everything to confirm that you already to perform hard reset on Samsung Z3
8. Samsung Z3 will continue to hard reset process to restore factory default.

2ndMethode. Hard Reset Samsung Z3 Using Hardware Keys:

1. Make sure your battery is fully charged, we recomended that your battery has 80% power
2. Always BackUp your important data that store in Samsung Z3. see this guide
3. Turn Off your Samsung Z3 by hold and press Power Button for a second.
4. Release any SIM card and SD card that was installed on your Samsung Z3 smartphone.
5. Then press and hold together a combination button Volume Up + Home Button + Power button   at same time for a seconds.

   

   Hard Reset Samsung Z3
6. Then you will see Samsung Galaxy J7 Logo. On this step release Power Button only, while keep holding Volume Up and Home Button.

   

   Samsung Z3 Logo
7. Release all button when your device enter Tizen System Recovery.

   

   Tizen System Recovery.
8. On this screen you can select menu Phone Reinitialization. Scroll down using Volume Down button, and confirm it using Power Button.

   

   Phone Reinitialization samsung z3

9. Then Select Yes. This will erase all data on your device except SD-Card.

   

   hard reset samsung z3

10. Now, wait the hard reset process to restoring setting to factory defaults.

    

    hard reset process
11. After a few minute hard reset process will finished, then reboot your device
12. Done, your hard reset process success now.

Video Guide.