Guide To Install CWM and Root Acer Liquid E3 E380 Android.

Root Acer Liquid E3 E380 . Today's guidebelajar will share to you about how to perform root on android smartphone device. Now I will explain how to root on Acer Liquid E3 E380 . this device comes with Android OS, v4.2.2 (Jelly Bean), Processors Mediatek MT6572M, Dual Core 1 GHz, GPU Mali-400, 2 GB of RAM as their engine. Before we continued our experiment I will explain to you what is the meaning of root on android, additional feature is main camera with 2 MP will give you good experience to take any picture.

Rooting is the process of allowing users of smartphones, tablets and other devices running the Android mobile operating system to attain privileged control (known as root access) over various Android's subsystems. One thing that should you know that rooting on your Acer Liquid E3 E380  may cause loss of warranty. You are only responsible for any further losses and damages caused to device. We will not be held liable in any circumstances.

Tool To Root Acer Liquid E3 E380.

To perform root on Acer Liquid E3 E380 we use a computer with windows operating system, and some tool below ;

1. Scatter file for Acer Liquid E3 E380, Download here
2. Recovery.img Download here
3. Download CWM recovery Here
4. SuperSU V.2.46 Download

Guide Install CWM Acer Liquid E3 E380 step by Step.

Make sure to always take backup all your important data like music, video, SMS, document (see this guide) and other data to the other resource outside of Acer Liquid E3 E380 device, and make sure your battery is fully charged or at least there is 80% of power on it before you continoued to proceed.

1. Make sure your device is Acer Liquid E3 E380. because this guide is intended just for this device
2. Make sure you have enabled USB Debugging on your Acer Liquid E3 E380, or you can see this guide how to do it.
3. Download all file needed, when finish you can install this tool on your computer
4. Extract the other downloaded file (Extract Root_Dan_CWM_Acer_E3 E380 & SP_Flash_Tool_v5134800) save in anywhere on your hard drive.
5. Copy UPDATE-SuperSU-v2.02 which belong in CWM+Root Liquid E3 E380 folder to SD Card.
6. Turn Off your Acer Liquid E3 E380, 
7. Run Flash Tool which this file is in the SP_Flash_Tool_v5.1348.00 folder
8. Next, Connect your Acer Liquid E3 E380 to Computer, while holding the power button and volume up. The PC will detect the new hardware, just ignore it. 
9. Open SP flash tool software and click scatter load. find Acer Liquid E3 E380 scatter storage location earlier.
10. In the Scatter Loading field go to the folder where you extracted the Flash Tool and select MT6752_Android_scatter.txt 
    
    

    

    Flash / Install Firmware Acer Liquid E3 E380

11. Then you click options ->Download -> then check DA DL all with checksum.

    

    Flash / Install Firmware Acer Liquid E3 E380

12. On download tab, ensure you have selected download only option from dropdown menu, see below picture.

    

    Flash / Install Firmware Acer Liquid E3 E380

13. Then, click download button on top right and connect your Acer Liquid E3 E380 with USB cable in phone switch off position.

    

    Flash / Install Firmware Acer Liquid E3 E380

14. Process will run automatic, and you can see the red stripe showing download percentage at bellow
15. When your process complete, you can see a green circle with tick mark. 

    

    Flash / Install Firmware Acer Liquid E3 E380

16. Now disconnect your Acer Liquid E3 E380
17. Intall you battery again. 
18. Then, start your Acer Liquid E3 E380. (remember, on the first booting it will take a long time to start)
19. Success. You have been installed CWM on your Acer Liquid E3 E380

Guide To Root Acer Liquid E3 E380 (After Install CWM Recovery)

When you have finished installing CWM recovery on your Acer Liquid E3 E380, now you can perform root on this device, follow this guide how to do it :

1. Enter to CWM Recovery by Press and hold Power button and Volume UP at the same time.
2. Use volume down button to select all menu
3. In this menu you will see 3 options :

   

   Root Acer Liquid E3 E380

• Recovery
• Fastboot
• Normal 
4. You can select recovery menu, use volume Up button for OK
5. Now , you select Install ZIP From SD Card→Choose ZIP from SD Card→Pilih UPDATE-SuperSU-v2.02

   

   Root Acer Liquid E3 E380

6. After finish you must reboot your Acer Liquid E3 E380, when your phone boot up and ready to use, you will see SuperSU icon on App drawer.

   

   Root Acer Liquid E3 E380

7. Finish, now your Acer Liquid E3 E380 has been rooted.

Alternative Guide To Root Acer Liquid E3 E380 With Kingo Root.

Make sure to always take backup all your important data like music, video, SMS, document (see this guide) and other data to the other resource outside of Acer Liquid E3 E380 device, and make sure your battery is fully charged or at least there is 80% of power on it before you continoued to proceed.

1. Make sure your device is Acer Liquid E3 E380 because this guide is intended just for this device.
2. Then you download root tool called KingoRoot to root Acer Liquid E3 E380


3. After you download it, install and run on your PC or computer.
4. Plug your Acer Liquid E3 E380 phone to your PC using a USB cable.
5. Wait till Kingo Root detects your Acer Liquid E3 E380 phone.
6. When program launch, click root green button, show picture bellow

   

   root Acer Liquid E3 E380

7. You can wait until root process finish.
8. After rooting your phone will restart automatically.
9. Done.

Guide To Install CWM and Root Acer Liquid Z200 Android.

Root Acer Liquid Z200 . Today's guidebelajar will share to you about how to perform root on android smartphone device. Now I will explain how to root on Acer Liquid Z200 . this device comes with Android OS, v4.4.2 (Kitkat), Processors Mediatek MT6572M, Dual Core 1 GHz, GPU Mali-400, 2 GB of RAM as their engine. Before we continued our experiment I will explain to you what is the meaning of root on android, additional feature is main camera with 2 MP will give you good experience to take any picture.

Rooting is the process of allowing users of smartphones, tablets and other devices running the Android mobile operating system to attain privileged control (known as root access) over various Android's subsystems. One thing that should you know that rooting on your Acer Liquid Z200  may cause loss of warranty. You are only responsible for any further losses and damages caused to device. We will not be held liable in any circumstances.

Tool To Root Acer Liquid Z200.

To perform root on Acer Liquid Z200 we use a computer with windows operating system, and some tool below ;

1.  CWM Philz Acer for Acer Liquid Z200, Downlaod (chenge this file after download with recovery.img)


2. Latest Version of SP flash tool (v5134800) : Download
3. Vcom Driver MT6589, Download Here
4. USB Driver for Acer Liquid Z200, Here
5. SuperSU V.2.46 Download
6. Scatter File MT6572 Download
7. ADB Driver, Download
8. ADB Driver Installer Download

Guide Install CWM Acer Liquid Z200 step by Step.

Make sure to always take backup all your important data like music, video, SMS, document (see this guide) and other data to the other resource outside of Acer Liquid Z200 device, and make sure your battery is fully charged or at least there is 80% of power on it before you continoued to proceed.

1. Make sure your device is Acer Liquid Z200. because this guide is intended just for this device
2. Make sure you have enabled USB Debugging on your Acer Liquid Z200, or you can see this guide how to do it.
3. Download all file needed, when finish you can install this tool on your computer
4. Extract the other downloaded file (Extract Root_Dan_CWM_Acer_Z200 & SP_Flash_Tool_v5134800) save in anywhere on your hard drive.
5. Copy UPDATE-SuperSU-v2.02 which belong in CWM+Root Liquid Z200 folder to SD Card.
6. Turn Off your Acer Liquid Z200, then remove battery and SIM card by open case on back of phone
7. Run Flash Tool which this file is in the SP_Flash_Tool_v5.1348.00 folder
8. Next, Connect your Acer Liquid Z200 to Computer, while holding the power button and volume up. The PC will detect the new hardware, just ignore it. 
9. Open SP flash tool software and click scatter load. find Acer Liquid Z200 scatter storage location earlier.
10. In the Scatter Loading field go to the folder where you extracted the Flash Tool and select MT6752_Android_scatter.txt 
    
    

    

    Flash / Install Firmware Acer Liquid Z200

11. Then you click options ->Download -> then check DA DL all with checksum.

    

    Flash / Install Firmware Acer Liquid Z200

12. On download tab, ensure you have selected download only option from dropdown menu, see below picture.

    

    Flash / Install Firmware Acer Liquid Z200

13. Then, click download button on top right and connect your Acer Liquid Z200 with USB cable in phone switch off position.

    

    Flash / Install Firmware Acer Liquid Z200

14. Process will run automatic, and you can see the red stripe showing download percentage at bellow
15. When your process complete, you can see a green circle with tick mark. 

    

    Flash / Install Firmware Acer Liquid Z200

16. Now disconnect your Acer Liquid Z200
17. Intall you battery again. 
18. Then, start your Acer Liquid Z200. (remember, on the first booting it will take a long time to start)
19. Success. You have been installed CWM on your Acer Liquid Z200

Guide To Root Acer Liquid Z200

When you have finished installing CWM recovery on your Acer Liquid Z200, now you can perform root on this device, follow this guide how to do it :

1. Enter to CWM Recovery by Press and hold Power button and Volume UP at the same time.
2. Use volume down button to select all menu
3. In this menu you will see 3 options :
   
   

   

   Root Acer Liquid Z200

• Recovery
• Fastboot
• Normal 
4. You can select recovery menu, use volume Up button for OK
5. Now , you select Install ZIP From SD Card→Choose ZIP from SD Card→Pilih UPDATE-SuperSU-v2.02

   

   Root Acer Liquid Z200

6. After finish you must reboot your Acer Liquid Z200, when your phone boot up and ready to use, you will see SuperSU icon on App drawer.

   

   Root Acer Liquid Z200

7. Finish, now your Acer Liquid Z200 has been rooted

Guide To Install CWM and Root Acer Liquid E700 Android.

Root Acer Liquid E700 . Today's guidebelajar will share to you about how to perform root on android smartphone device. Now I will explain how to root on Acer Liquid E700 . this device comes with Android OS, v4.4.2 (Kitkat), Processors Mediatek MT6582M Quad-core 1.2 GHz Cortex-A7, GPU Mali-400, 2 GB of RAM as their engine. Before we continued our experiment I will explain to you what is the meaning of root on android, additional feature is main camera with 8 MP will give you good experience to take any picture.

Rooting is the process of allowing users of smartphones, tablets and other devices running the Android mobile operating system to attain privileged control (known as root access) over various Android's subsystems. One thing that should you know that rooting on your Acer Liquid E700  may cause loss of warranty. You are only responsible for any further losses and damages caused to device. We will not be held liable in any circumstances.

Tool To Root Acer Liquid E700.

To perform root on Acer Liquid E700 we use a computer with windows operating system, and some tool below ;

1. Root and CWM for Acer Liquid E700, Downlaod
2. Latest Version of flash tool (v5134800) : Download
3. Vcom Driver MT6589, Download Here
4. USB Driver for Acer Liquid E700, Here

Guide Install CWM Acer Liquid E700 step by Step.

Make sure to always take backup all your important data like music, video, SMS, document (see this guide) and other data to the other resource outside of Acer Liquid E700 device, and make sure your battery is fully charged or at least there is 80% of power on it before you continoued to proceed.

1. Make sure your device is Acer Liquid E700. because this guide is intended just for this device
2. Make sure you have enabled USB Debugging on your Acer Liquid E700, or you can see this guide how to do it.
3. Download all file needed, when finish you can install tool number 3 and 4.
4. Extract the other downloaded file (Extract Root_Dan_CWM_Acer_E700 & SP_Flash_Tool_v5134800) save in anywhere on your hard drive.
5. Copy UPDATE-SuperSU-v2.02 which belong in CWM+Root Liquid E700 folder to SD Card.
6. Run Flash Tool which this file is in the SP_Flash_Tool_v5.1348.00 folder
7. Then remove your sim card and SD Card  if installed
8. Next, Connect your Acer Liquid E700 to Computer, while holding the power button and volume up. The PC will detect the new hardware, just ignore it. 
9. Open SP flash tool software and click scatter load. find Acer Liquid E700 scatter storage location earlier.
10. In the Scatter Loading field go to the folder where you extracted the Flash Tool and select MT6752_Android_scatter.txt 
    
    

    
    

    

    Flash / Install Firmware Acer Liquid E700

11. Then you click options ->Download -> then check DA DL all with checksum.

    

    Flash / Install Firmware Acer Liquid E700

12. On download tab, ensure you have selected download only option from dropdown menu, see below picture.

    

    Flash / Install Firmware Acer Liquid E700

13. Then, click download button on top right and connect your Acer Liquid E700 with USB cable in phone switch off position.

    

    Flash / Install Firmware Acer Liquid E700

14. Process will run automatic, and you can see the red stripe showing download percentage at bellow
15. When your process complete, you can see a green circle with tick mark. 

    

    Flash / Install Firmware Acer Liquid E700

16. Now disconnect your Acer Liquid E700
17. Intall you battery again. 
18. Then, start your Acer Liquid E700. (remember, on the first booting it will take a long time to start)
19. Success. enjoy.

Guide To Root Acer Liquid E700

When you have finished installing CWM recovery on your Acer Liquid E700, now you can perform root on this device, follow this guide how to do it :

1. Enter to CWM Recovery by Press and hold power button and Volume UP at the same time.
2. Use volume down button to select all menu
3. In this menu you will see 3 options :
• Recovery
• Fastboot
• Normal 
4. You can select recovery menu, use volume Up button for OK
5. Now , you select Install ZIP From SD Card→Choose ZIP from SD Card→Pilih UPDATE-SuperSU-v2.02
6. After finish you must reboot your Acer Liquid E700
7. Finish, now your Acer Liquid E700 has been rooted

Guide To Root Acer Liquid Z500 Android Using Framaroot.

Root Acer Liquid Z500 . Today's guidebelajar will share to you about how to perform root on android smartphone device. Now I will explain how to root on Acer Liquid Z500 . this device comes with Android OS, v4.1.1 (Jelly Bean), Processors 1 GHz Cortex-A5, Adreno 200, 512 MB of RAM as their engine. Before we continued our experiment I will explain to you what is the meaning of root on android, additional feature is main camera with 5 MP will give you good experience to take any picture.

Rooting is the process of allowing users of smartphones, tablets and other devices running the Android mobile operating system to attain privileged control (known as root access) over various Android's subsystems. One thing that should you know that rooting on your Acer Liquid Z500  may cause loss of warranty. You are only responsible for any further losses and damages caused to device. We will not be held liable in any circumstances.

Guide Root Acer Liquid Z500 step by Step.

Make sure to always take backup all your important data like music, video, SMS, document (see this guide) and other data to the other resource outside of Acer Liquid Z500 device, and make sure your battery is fully charged or at least there is 80% of power on it before you continoued to proceed.

1. Make sure your device is Acer Liquid Z500. because this guide is intended just for this device
2. Download apk Framaroot ke PC Anda.
3. BackUp your data on Acer Liquid Z5.


4. Plug your Acer Liquid Z5 to your computer
5. Copy and paste apk Framaroot from PC to root folder on your SDCard.
6. Go to Settings > Security > check on Unknown Sources 
7. Open file explorer app and install Framaroot APK.(if you don't have file explorer app you can download Astro File Manager / ES File Explorer) 
8. Open Framaroot App on Acer Liquid Z5.

   

   Root Acer Liquid Z5 with Framaroot.

9. From an App, select Install Superuser.


10. Than select Boromir
11. I fyour root process is finished you will see pop up message like this picture.

    

    Root Acer Liquid Z5 with Framaroot.
12. Than Reboot your Acer Liquid Z5.
13. finish.

Guide To Root Acer Liquid Z120 (Z2) Android.

Root Acer Liquid Z120 (Z2) . Today's guidebelajar will share to you about how to perform root on android smartphone device. Now I will explain how to root on Acer Liquid Z120 (Z2) . this device comes with Android OS, v4.1.1 (Jelly Bean), Processors 1 GHz Cortex-A5, Adreno 200, 512 MB of RAM as their engine. Before we continued our experiment I will explain to you what is the meaning of root on android, additional feature is main camera with 5 MP will give you good experience to take any picture.

Rooting is the process of allowing users of smartphones, tablets and other devices running the Android mobile operating system to attain privileged control (known as root access) over various Android's subsystems. One thing that should you know that rooting on your Acer Liquid Z120 (Z2)  may cause loss of warranty. You are only responsible for any further losses and damages caused to device. We will not be held liable in any circumstances.

Guide Root Acer Liquid Z120 (Z2) step by Step.

Make sure to always take backup all your important data like music, video, SMS, document (see this guide) and other data to the other resource outside of Acer Liquid Z120 (Z2) device, and make sure your battery is fully charged or at least there is 80% of power on it before you continoued to proceed.

1. Make sure your device is Acer Liquid Z120 (Z2). because this guide is intended just for this device
2. Make sure you have enabled USB Debugging on your Acer Liquid Z120 (Z2), or you can see this guide how to do it.
3. This root method is work on computer with windows operating system, on testing guide we use windows 7 on it.
4. Make sure you have disable all antivirus that run on background.
5. Disconnect your internet connection too.


6. Then you must download this tool, which designed for perform root on Acer Liquid Z120 (Z2).
7. When you finished download this tool, you can extract on the certain folder on your computer.

Install Driver Acer Liquid Z120 (Z2)

1. Go to device manager, Right-click on your PC name and select add legacy PC hardware
2. click Next
3. Install the hardware that I manually select from a list (Advanced)
4. Select Show All Devices, click next
5. Click Have Disk, navigate to the file android_winusb.inf
6. Click Next, Next until Finish

Next step

2. Go to device manager, Right-click on your PC name and select add legacy PC hardware
3. click Next
4. Install the hardware that I manually select from a list (Advanced)
5. Select Show All Devices, click next
6. Click Have Disk, navigate to the file usb2ser_Win7.inf
7. Click Next, Next until Finish

Run  AdbDriverInstaller.exe program

1. Click Install it will detect your Acer devices.

Install Recovery.

1. Connect your Acer Liquid Z120 (Z2) to your PC or computer
2. Run the Flash_tool.exe program 
3. On Scatter-Loading navigate to the folder MT6575_Android_scatter_emmc.txt at Dump Stock ROM Z120 folder.
4. Then, Remove all of the check (checklist) EXCEPT :  preloader, DSP_BL & RECOVERY
5. Click on the RECOVERY, navigate to Recovery1.img.


6. You can choose type of recovery CWM or TWRP, you can navigate to the file (file with extension * .img)
7. Click on DOWNLOAD,
8. Then you can Unplug the data cable, and then turn off Acer Liquid Z120 (Z2)
9. When your device is turn off (your phone will long vibrate) and then connect to the computer again (which Acer Liquid Z120 (Z2) is off / OFF)
10. Then on your computer will show download mode, wait for it to finish
11. If successful it will appear green circle logo
12. Now you can Unplug Acer Liquid Z120 (Z2).

Install SuperSU.

1. Please Make sure the file rootsuperuser.zip Acer Liquid Z120 (Z2) has been copied to SDCard 
2. Now you must enter your Acer Liquid Z120 (Z2) into RECOVERY MODE, how to do this ?
• Press and hold the power button
• If vibrating, still hold power, immediately press vol up.
3. Then your phone will appear Select Boot Mode, 
4. You can select select Recovery (Use the vol up for select, vol down for enter).
5. Then find your rootsuperuser.zip
6. When file is selected, select YES rootsuperuser will be installed on your phone.
7. Return to the home page, and select rebot
8. After the Acer Liquid Z120 (Z2) boot up you will see superuser aplication on your appliacation drawer.
9. finish

Guide To Root Acer Liquid Z205 Android Using KingRoot.

Root Acer Liquid Z205 . Today's guidebelajar will share to you about how to perform root on android smartphone device. Now I will explain how to root on Acer Liquid Z205 . this device comes with Android OS, v4.2.2 (Jelly Bean), Processors Mediatek MT6572 Dual-core 1.3 GHz, GPU Mali-400, 512 MB of RAM as their engine. Before we continued our experiment I will explain to you what is the meaning of root on android, additional feature is main camera with 5 MP will give you good experience to take any picture.

Rooting is the process of allowing users of smartphones, tablets and other devices running the Android mobile operating system to attain privileged control (known as root access) over various Android's subsystems. One thing that should you know that rooting on your Acer Liquid Z205  may cause loss of warranty. You are only responsible for any further losses and damages caused to device. We will not be held liable in any circumstances.

Guide Root Acer Liquid Z205 step by Step.

Make sure to always take backup all your important data like music, video, SMS, document (see this guide) and other data to the other resource outside of Acer Liquid Z205 device, and make sure your battery is fully charged or at least there is 80% of power on it before you continoued to proceed.

1. Make sure your device is Acer Liquid Z205 . because this guide is intended just for this device
2. Then, Download this root apk tool for Acer Liquid Z205 . this tool is called KingRoot


3. After you download this tool, install this KingRoot on your Acer Liquid Z205.
4. After you installed you will see this icon like this.

   

   icon kingroot

5. You must enable unknown Source in your device, Go to Settings > Security > Device Administration > Unknown Source
6. Then run KingRoot on your devices
7. To start root process, just tap start root button on this application

   

   Root Acer Liquid Z205

8. If your root process finished, you will see green check mark on your application screen.

   

   Root Acer Liquid Z205

9. And now your Acer Liquid Z205 will reboot.
10. You can Find Kinguser on your application drawer to ensure that your Acer Liquid Z205 has been rooted.
11. Verify your root access on your Acer Liquid Z205 with install the Root Check. find it HERE.


12. Finish.

Guide Unroot Acer Liquid Z205.

1. Open the KingUser application in your Acer Liquid Z205 .
2. Go to Settings and select Remove Root Permissions.
3. A popup will appear on your screen. Select Remove.
4. Now Restart your Acer Liquid Z205 device.
5. Done.

Guide To Root Acer Liquid Z410 Using Kingo Root.

Root Acer Z410 . Today's guidebelajar will share to you about how to perform root on android smartphone device. Now I will explain how to root on Acer Liquid Z410. this device comes with Android OS, v4.2.2 (Jelly Bean), Processors Mediatek MT6572 Dual-core 1.3 GHz, GPU Mali-400, 512 MB of RAM as their engine. Before we continued our experiment I will explain to you what is the meaning of root on android, additional feature is main camera with 5 MP will give you good experience to take any picture.

Rooting is the process of allowing users of smartphones, tablets and other devices running the Android mobile operating system to attain privileged control (known as root access) over various Android's subsystems. One thing that should you know that rooting on your Acer Liquid Z410  may cause loss of warranty. You are only responsible for any further losses and damages caused to device. We will not be held liable in any circumstances.

Guide Root Acer Liquid Z410 step by Step.

Make sure to always take backup all your important data like music, video, SMS, document (see this guide) and other data to the other resource outside of Acer Z410 device, and make sure your battery is fully charged or at least there is 80% of power on it before you continoued to proceed.

1. Make sure your device is Acer Liquid Z410. because this guide is intended just for this device
2. Then, Download this root tool for Acer Liquid Z410 . this tool is called Kingo Root


3. After you download this tool, install this Kingo Root on your PC
4. Then run Kingo Root on your PC

   

   Root Acer Liquid Z410 Using Kingo Root.

5.  Then Plug your Acer Liquid Z410 to your PC using USB Cable driver, if you don't have driver for this device, download here
6. Enable USB Debugging on your Acer Liquid Z410. how to do it ? see this guide. or This


7. Wait a minute, then you will see notification.
8. Then click on Root Button to start root process, and wait. Read the notification carefully and be aware of the risks involved in Android rooting process.

   

   Root Acer Liquid Z410 Using Kingo Root.
10. Now Root process is Succeeded, Click "Finish" to reboot your Acer Z410 device. 

    

    Root Acer Liquid Z410 Using Kingo Root.

11. And finally Your device is now rooted by Kingo Android Root.
12. Find SuperSU on your application drawer to ensure that your Acer Z410 has been rooted.
13. Verify your root access on your Acer Z410 with install the Root Check. find it HERE.
14. Finish.