Guide To Install CWM and Root Acer Liquid E700 Android.

Root Acer Liquid E700 . Today's guidebelajar will share to you about how to perform root on android smartphone device. Now I will explain how to root on Acer Liquid E700 . this device comes with Android OS, v4.4.2 (Kitkat), Processors Mediatek MT6582M Quad-core 1.2 GHz Cortex-A7, GPU Mali-400, 2 GB of RAM as their engine. Before we continued our experiment I will explain to you what is the meaning of root on android, additional feature is main camera with 8 MP will give you good experience to take any picture.

Rooting is the process of allowing users of smartphones, tablets and other devices running the Android mobile operating system to attain privileged control (known as root access) over various Android's subsystems. One thing that should you know that rooting on your Acer Liquid E700  may cause loss of warranty. You are only responsible for any further losses and damages caused to device. We will not be held liable in any circumstances.

Tool To Root Acer Liquid E700.

To perform root on Acer Liquid E700 we use a computer with windows operating system, and some tool below ;

1. Root and CWM for Acer Liquid E700, Downlaod
2. Latest Version of flash tool (v5134800) : Download
3. Vcom Driver MT6589, Download Here
4. USB Driver for Acer Liquid E700, Here

Guide Install CWM Acer Liquid E700 step by Step.

Make sure to always take backup all your important data like music, video, SMS, document (see this guide) and other data to the other resource outside of Acer Liquid E700 device, and make sure your battery is fully charged or at least there is 80% of power on it before you continoued to proceed.

1. Make sure your device is Acer Liquid E700. because this guide is intended just for this device
2. Make sure you have enabled USB Debugging on your Acer Liquid E700, or you can see this guide how to do it.
3. Download all file needed, when finish you can install tool number 3 and 4.
4. Extract the other downloaded file (Extract Root_Dan_CWM_Acer_E700 & SP_Flash_Tool_v5134800) save in anywhere on your hard drive.
5. Copy UPDATE-SuperSU-v2.02 which belong in CWM+Root Liquid E700 folder to SD Card.
6. Run Flash Tool which this file is in the SP_Flash_Tool_v5.1348.00 folder
7. Then remove your sim card and SD Card  if installed
8. Next, Connect your Acer Liquid E700 to Computer, while holding the power button and volume up. The PC will detect the new hardware, just ignore it. 
9. Open SP flash tool software and click scatter load. find Acer Liquid E700 scatter storage location earlier.
10. In the Scatter Loading field go to the folder where you extracted the Flash Tool and select MT6752_Android_scatter.txt 
    
    

    
    

    

    Flash / Install Firmware Acer Liquid E700

11. Then you click options ->Download -> then check DA DL all with checksum.

    

    Flash / Install Firmware Acer Liquid E700

12. On download tab, ensure you have selected download only option from dropdown menu, see below picture.

    

    Flash / Install Firmware Acer Liquid E700

13. Then, click download button on top right and connect your Acer Liquid E700 with USB cable in phone switch off position.

    

    Flash / Install Firmware Acer Liquid E700

14. Process will run automatic, and you can see the red stripe showing download percentage at bellow
15. When your process complete, you can see a green circle with tick mark. 

    

    Flash / Install Firmware Acer Liquid E700

16. Now disconnect your Acer Liquid E700
17. Intall you battery again. 
18. Then, start your Acer Liquid E700. (remember, on the first booting it will take a long time to start)
19. Success. enjoy.

Guide To Root Acer Liquid E700

When you have finished installing CWM recovery on your Acer Liquid E700, now you can perform root on this device, follow this guide how to do it :

1. Enter to CWM Recovery by Press and hold power button and Volume UP at the same time.
2. Use volume down button to select all menu
3. In this menu you will see 3 options :
• Recovery
• Fastboot
• Normal 
4. You can select recovery menu, use volume Up button for OK
5. Now , you select Install ZIP From SD Card→Choose ZIP from SD Card→Pilih UPDATE-SuperSU-v2.02
6. After finish you must reboot your Acer Liquid E700
7. Finish, now your Acer Liquid E700 has been rooted